Các chức năng chính:
NEW Compatibility with ESD Glove Test FixturePair with the EMIT 50755 ESD Glove Test Fixture to allow operators to perform tests while wearing gloves or finger cots
Tests Operator’s Path-To-Ground; Wrist Strap limits 750 kilohms to 10 megohms, Footwear limits 750 kilohms to 35 megohms*Determines that operator’s personal grounding device** is functioning correctly
Simultaneous Testing in Up to 3 SecondsReduces time spent testing personal grounding devices used in ESD Control Plans
Solid State Touch Test Button with No Moving PartsMaintains accuracy of tests and extends the lifetime of the tester
30 Volt Test SignalProvides accurate tests that are not humidity dependent
Relay for Use with Automatic Doors Or Other Locking SystemsControls access to ESD Protected Areas
Calibration Unit Available for Accurate Performance And Conformity Testing In The Field
See Desco Item 50424
NIST CalibratedCalibrated with accepted procedures and standards traceable to the National Institute of Standards and Technology. For more information on calibration of Desco products, see Calibration
Made in the United States of AmericaThis item is made and stocked in Chino, CA
* Default test ranges listed. Additional test settings are noted in the tech bulletin TB-3034.
** The Combo Tester X3 will also test a Groundable Static Control Garment System. The Groundable Static Control Garment System must have an RTG of < 3.5 x 107 ohms to meet the required limit of ANSI/ESD S20.20-2007 tested per ANSI/ESD STM2.1 and ESD TR53.